FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Embedded Web Server User Guide (AA-RTDRC-TE, July 2004)

Error Messages
175Embedded Web Server User Guide
Error 238: Invalid
Feature Key
The feature key entered is
invalid.
Verify that the feature key
was entered correctly and
resubmit. Contact your
service representative
with further difficulties.
Error 239: Fabric binding
entry not found
The user requested to
remove a fabric binding
entry that is not in the
pending fabric
membership list.
Verify that the correct
entry (both WWN and
Domain ID) is being
requested for removal
from the list and resubmit
the request.
Error 240: Duplicate
fabric binding member
The user requested to add
an entry to the fabric
binding list that is already
a member of the list.
Verify that the correct
entry (both
WWN and
Domain ID) is being
requested for addition to
the list and resubmit the
request.
Error 241:
Comma-delimited mode
must be active
Comma-delimited mode
must be active to execute
this command
Some commands require
that comma-delimited
mode be active (for
example,
show.nameserverExt
). Enable
comma-delimited mode
and re-issue the
command.
Error 242: Open trunking
threshold % value must be
0—99
An invalid threshold
percentage has been
entered.
The Open trunking
threshold must be in the
range 0—99. Make sure
all values are valid and
resubmit the request.
Error 243: Not allowed
while S/390 Mode is
Enabled
This operation is not
allowed while S/390
mode (FICON
management style in
HAFM) is enabled.
This command is not valid
for the S/390
environment (FICON
management style in
HAFM).
Error 244: Not allowed
while Enterprise Fabric
Mode is Active and
Switch is Online
This operation is not
allowed while the switch
is in Enterprise Fabric
mode and the switch is
online.
Make sure Enterprise
Fabric mode is not
enabled and the switch is
offline.
Table 9: Embedded Web Server Messages (Continued)
Message Description Action