FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Embedded Web Server User Guide (AA-RTDRC-TE, July 2004)

Error Messages
174 Embedded Web Server User Guide
Error 232: Invalid
Domain ID
The domainID
parameter does not
contain a valid value.
For the appropriate
parameters, see the
section of the manual that
corresponds to the
attempted command.
Error 233: Invalid
Member
The zone member added
is not valid.
For the appropriate
parameters, see the
section of the manual that
corresponds to the
attempted command.
Error 234: Invalid
Command
The system cannot
associate an action with
the submitted command.
The command may be
misspelled, required
parameters may be
missing, or the request
may not be applicable.
Consult the
documentation for the
command to be sure this
command was entered
correctly, all parameters
are valid and present,
and that the syntax is
correct.
Error 235: Unrecognized
Command
Cannot recognize the
command and cannot
perform the help '?'
command as requested.
The entered command is
misspelled, or the prompt
is not positioned at the
right place. For the
appropriate syntax, see
the section of the manual
that corresponds to the
attempted command.
Error 236: Ambiguous
Command
Cannot recognize the
command issued.
The command cannot be
interpreted because a
unique match cannot be
identified. For the
appropriate syntax, see
the section of the manual
that corresponds to the
attempted command.
Enter the complete
command and resubmit.
Error 237: Invalid Zoning
Database
There was an
unidentifiable problem in
the local zone set work
area.
Verify all parameters are
entered correctly and
resubmit. Otherwise, the
pending zone set should
be cleared and
reconstructed.
Table 9: Embedded Web Server Messages (Continued)
Message Description Action