FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Embedded Web Server User Guide (AA-RTDRC-TE, July 2004)

Error Messages
173Embedded Web Server User Guide
Error 225: Argument
Does Not Contain All
USASCII Characters
The argument contains
non-USASCII characters.
For the appropriate
parameters, see the
section of the manual that
corresponds to the
attempted command.
Error 226: Argument Is
Too Long
One or more parameters
are invalid for this
command.
For the appropriate
parameters, see the
section of the manual that
corresponds to the
attempted command.
Error 227: Invalid SNMP
Community Name
The value entered for the
SNMP community name
is invalid
The community name
must not exceed 32
characters in length.
Duplicate community
names are allowed, but
corresponding write
authorizations must
match. Enter an
appropriate SNMP
community name and
resubmit.
Error 228: Invalid Write
Authorization Argument
The write authorization
parameter does not
contain a valid value.
Parameters must be typed
exactly to specification to
be recognized correctly.
Error 229: Invalid UDP
Port Number
The udpPortNum
parameter does not
contain a valid value.
Parameters must be typed
exactly to specification to
be recognized correctly
by the system.
Error 230: Invalid WWN The wwn parameter does
not contain a valid value.
For the appropriate
parameters, see the
section of the manual that
corresponds to the
attempted command.
Error 231: Invalid Port
number
The portNum parameter
does not contain a valid
value.
For the appropriate
parameters, see the
section of the manual that
corresponds to the
attempted command.
Table 9: Embedded Web Server Messages (Continued)
Message Description Action