FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Embedded Web Server User Guide (AA-RTDRC-TE, July 2004)

Error Messages
172 Embedded Web Server User Guide
Error 218: Invalid Port
Number
The value entered for the
port number is invalid
Enter a port number
within the range
supported by your
director or switch. Valid
values are:
0—15 for the
Edge Switch 2/16
0—23 for the
Edge Switch 2/24
0—31 for the
Edge Switch 2/32
0—63 for the
Director 2/64
0—127 and 132—143
for the Director 2/140
Error 219: Invalid Port
Type
The port type configured
is invalid.
A port may be configured
to be an eport, gport, or
fport. Be sure the port is
configured appropriately
and resubmit the
command. On the Edge
Switch 2/24 only, fxport
and gxport types are also
supported.
Error 222: Invalid SNMP
Community Index
The value entered for the
SNMP community index
is invalid.
The SNMP community
index must be an integer
in the range 1—6. Make
the appropriate changes
and resubmit the
command.
Error 223: Unknown
Error
The switch did not accept
the request
Contact your service
representative.
Error 224: Invalid
Argument
One or more parameters
are invalid for this
command.
For the appropriate
parameters, see the
section of the manual that
corresponds to the
attempted command.
Table 9: Embedded Web Server Messages (Continued)
Message Description Action