FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Embedded Web Server User Guide (AA-RTDRC-TE, July 2004)

Error Messages
170 Embedded Web Server User Guide
Error 181: Preferred path
must be disabled
The Preferred Path feature
must be disabled.
Disable the Preferred Path
feature.
Error 182: Source port
must be different than the
exit port
The source and exit ports
cannot be the same.
Configure a preferred
path with different source
and exit ports.
Error 201: Change
Authorization Request
Failed
The switch did not accept
the request to make a
change to NVRAM.
Be sure all parameters
have been entered
correctly and resubmit.
Contact your service
representative with
further problems.
Error 202: Invalid
Change Authorization ID
The switch will not accept
a change request from
this particular client.
Be sure all parameters
have been entered
correctly and resubmit.
Contact your service
representative with
further problems.
Error 203: Another Client
Has Change
Authorization
Another user is currently
making changes to this
switch.
Be sure all parameters
have been entered
correctly and resubmit.
Error 207: Change
Request Failed
The switch did not accept
the request.
Be sure all parameters
have been entered
correctly and resubmit.
Contact your service
representative with
further problems.
Error 208: Change
Request Timed Out
Authorization time to
make NVRAM changes
has expired.
Be sure all parameters
have been entered
correctly and resubmit.
Contact your service
representative with
further problems.
Error 209: Change
Request Aborted
The switch did not accept
the request.
Be sure all parameters
have been entered
correctly and resubmit.
Contact your service
representative with
further problems.
Table 9: Embedded Web Server Messages (Continued)
Message Description Action