FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Embedded Web Server User Guide (AA-RTDRC-TE, July 2004)

Error Messages
162 Embedded Web Server User Guide
Error 91: E_Port Type
Configured
Ports are not allowed to
be configured as E_Ports
in S/390 mode (FICON
management style in
HAFM).
Configure the port as
either an fport or gport
and resubmit the
command.
Error 92: Not Allowed
While Port Is Unblocked
The port must be blocked
to complete this request.
Block the port and
resubmit the command.
Error 93: Not Allowed
While FICON MS Is
Installed
This request cannot be
completed because
FICON Management
Server is installed.
This operation is not
supported. No action
necessary.
Error 94: Invalid Feature
Combination
The features requested
cannot be installed at the
same time on one
director or switch.
Contact your sales
representative.
Error 99: Preferred
Domain ID Cannot Be
Zero
This product cannot be
configured to have a
preferred domain ID
equal to zero (0).
Ensure that the ID is
expressed as an integer
in the range 1—31 and
resubmit.
Error 101: Command
Not Supported on This
Product
This product does not
support the requested
command.
Command not supported.
No action necessary.
Error 102: Switch Not
Operational
The request cannot be
completed because the
switch is not operational.
Consult the
installation/service
manual and contact your
service representative.
Error 103: Port Diagnostic
In Progress
The request cannot be
completed because a port
diagnostic is running.
Wait for the diagnostic to
complete.
Error 104: System
Diagnostic In Progress
The request cannot be
completed because a
system diagnostic is
running.
Wait for the diagnostic to
complete.
Error 105: Max Threshold
Definitions Reached
The maximum number of
total threshold alerts has
already been reached.
Remove a threshold alert
before adding the new
threshold alert. A total of
16 counter and
throughput threshold
alerts is allowed.
Table 9: Embedded Web Server Messages (Continued)
Message Description Action