FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Embedded Web Server User Guide (AA-RTDRC-TE, July 2004)

Operating and Managing Products and Parts
139Embedded Web Server User Guide
Note: Before resetting the product, you may want to review the kinds of data that will
be reset by browsing through the Configure page and associated tabs.
If the product configuration is reset, management access of the product may be
lost until the network information is restored. The product must be offline before
the configuration can be reset. See step 2 in “Configuring Ports” on page 31 for
instructions on setting the product offline.
Note: Since the current IP address for the product may not match the factory default
values, the Ethernet link between the product and the service processor may drop and
not reset. Make sure you record the product’s current IP address as you will want to
enter that value in the IP Address field, under the Configure page, Switch or Director
tab, and Network tab. See “Configuring Network Information” on page 45 for
instructions.
Note: After you reset the product configuration, you should view the product
information page as described in “Obtaining Product Information” on page 148.
Save the product information page to a file or print the page to verify the changes you
made and to identify the default values.