FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Embedded Web Server User Guide (AA-RTDRC-TE, July 2004)

Monitoring Products
131Embedded Web Server User Guide
Viewing the Link Incident Log
Select Monitor on the navigation panel. Select the Logs tab; the Logs tab view
displays. Select the Link Incident Log link. The Link Incident Log displays in
text format, as shown in Figure 38. The log displays in a separate browser
window. Close the browser window to close the log.
Figure 38: Link Incident Log View
The Link Incident Log provides the following information about link incidents:
■ Date/Time — Date and time when the link incident event occurred.
■ Port — The port on which the link incident occurred.
■ Link Incident Event — An ASCII string describing the link incident
event. The following events may cause a link incident to be written to the
log:
— Implicit incident. The attached node detects a condition that may
cause problems on the link.
— Bit-error threshold exceeded. The number of code violation errors has
exceeded the specified threshold.
— Loss-of-signal or Loss-of-synchronization. This occurs if a cable is
unplugged from an attached node. Loss-of-signal occurs when a cable
is unplugged from an attached node. Loss-of-synchronization is
reported if the condition has persisted for longer than the resource
allocation time out value (R_A_TOV).
— Not-operational (NOS) primitive sequence received.
— ------Primitive sequence timeout:
— ------Link reset protocol timeout occurred.