FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Embedded Web Server User Guide (AA-RTDRC-TE, July 2004)

Viewing Product and Fabric Data
110 Embedded Web Server User Guide
Viewing Fabric Information
Options on the View panel of the EWS interface enable you to see information
about the fabric in which a product participates. You can view each of the
following:
■ Operating parameters for a fabric.
■ Information about each of the devices that make up the fabric.
■ Topology of the fabric.
Viewing Operating Parameters for a Fabric
To view the Operating Parameters of a product, perform the following procedure:
1. Choose View from the navigation panel.
2. Choose the Operating Parameters tab. The Operating Parameters tab view
displays (Figure 30) showing Switch Parameters and Fabric Parameters.
This tab view shows the following Switch Parameters information for the
product:
■ BB Credit — the BB_Credit value for the fabric (not available on the
Edge Switch 2/24).
■ R_A_TOV — Resource Allocation Time Out Value (R_A_TOV) used by the
fabric. Specified in tenths of a second.
■ E_D_TOV — Error Detection Time Out Value (E_D_TOV) value used by
the fabric. Specified in tenths of a second.
■ Switch Priority — Priority value of the switch. Values can be Default,
Principal, and Never Principal.
■ Interop Mode — Interoperability mode of the fabric. Values can be
Homogenous Fabric and Open Fabric 1.0. (This field is not valid if the
product’s Operation Mode is S/390.)
Viewing Fabric Directors and Switches
To view information about the HP high availability fabric directors and switches
on a menu, perform the following procedure:
1. Choose View from the navigation panel.
2. Choose the Fabric tab and the Products tab. The Products tab view displays
(Figure 31).