FW 08.01.00 McDATA E/OS SNMP Support Manual (620-000131-630, November 2005)

2
Fabric Element Management MIB
2-77
McDATA SNMP Support
The values are defined as online(1) – Login may proceed, offline(2) –
Login cannot proceed, testing(3) – port is under test, link-failure(4) –
failure after online/testing.
FcFxPortPhysLastChange
Type TimeTicks
Provided By SNMP
Access R
Description The value of sysUpTime at the time the Fx_Port entered its current
operational status. A value of zero indicates that the Fx_Port’s
operational status has not changed since the agent last restarted.
This is SS_TIM_RD_TICKS(MILLISEC) * 10.
FcFxPortPhysRttov
Type MilliSeconds
Provided By SNMP
Access R
Description The Receiver_Transmitter_Timeout value of the Fx_Port. This is used
by the receiver logic to detect Loss of Synchronization.
This value is fixed at 100ms.
Fx_Port Fabric Login
Table
An entry containing service parameters established from a successful
Fabric Login.
fcFxlogiFxPortIndex
Type FcFeFxPortIndex
Provided By SNMP
Access R
Description This object identifies the Fx_Port within the module. This number
ranges from 1 to the value of fcFeModulePortCapacity for the
associated module. The value remains constant for the identified
Fx_Port until the module is re-initialized.