FW 08.01.00 McDATA E/OS SNMP Support Manual (620-000131-630, November 2005)

i-7
Index
tcpRtoMax 2-47
tcpRtoMin 2-47
udpInDatagrams 2-52
udpInErrors 2-52
udpLocalAddress 2-53
udpLocalPort 2-53
udpNoPorts 2-52
udpOutDatagrams 2-52
MIB-II
additional IP objects 2-41
additional TCP objects 2-51
address translation group 2-29
definition of 2-20
ICMP group 2-42
interfaces group 2-22
IP address tabler 2-35
IP address translation table 2-40
IP group 2-30
SNMP group 2-53
system group 2-20
TCP connection table 2-50
TCP group 2-47
UDP group 2-52
UDP listener table 2-53
MIBs
Fibre Alliance MIB 1-8
Fibre Channel Fabric Element (FCFE) MIB
1-8
introduction to 1-4
MIB-II 1-8
MIB-II, definition of 2-20
standard 1-7
MIBs support by McDATA 1-8
N
network management, introduction to 1-1
P
port binding
violation 2-12
private enterprise MIBs 1-8
S
SetRequest
1-3
SetRequest command 1-3
SNMP
description of 1-2
introduction to 1-1
SNMP commands 1-2
SNMPv3 1-4
SNMPv3 Access Control 1-5
SNMPv3 Security 1-5
SNMPv3 Security Features 1-5
standard MIBs 1-7
T
trap information, interpretation of (HP
OpenView) 2-16
trap information, interpretation of (MG-SOFT
MIB browser) 2-18
trap PDU, format of 2-3
traps
a new connection has been established on a
port 2-16
bit error rate for a link exceeds the threshold
2-14
definition of 1-9
Fibre Channel port operational state change
2-11
field descriptions 2-2
FRU operational state change 2-12
FRU removed or status unknown 2-12
FRU status changes to active 2-13
FRU status changes to backup 2-13
FRU status changes to failed 2-14
FRU status changes to update/busy 2-13
invalid primitive sequence 2-15
loss of signal or sync 2-14
message format 2-2
not operational primitive sequence is
received 2-15
PDU format 2-2
Port binding violation 2-12
primitive sequence timeout 2-15
purpose of 1-9
Threshold alert 2-12
UDP packets 2-2
U
UDP packets containing traps 2-2