FW 08.01.00 McDATA E/OS SNMP Support Manual (620-000131-630, November 2005)

G
SNMPv3 MIB
G-45
SNMPv3 MIB
snmpCommunityStatus
Syntax RowStatus
Max Access read-create
Status current
Description The status of this conceptual row in the snmpCommunityTable. An
entry in this table is not qualified for activation until instances of all
corresponding columns have been initialized, either through default
values, or through Set operations. The snmpCommunityName and
snmpCommunitySecurityName objects must be explicitly set.
There is no restriction on setting columns in this table when the value
of snmpCommunityStatus is active(1)."
Sequence
::= { snmpCommunityEntry 8 }
The snmpTargetAddrExtTable
snmpTargetAddrExtTable
Syntax SEQUENCE OF SnmpTargetAddrExtEntry
Max Access not-accessible
Status current
Description The table of mask and mms values associated with the
snmpTargetAddrTable. The snmpTargetAddrExtTable augments the
snmpTargetAddrTable with a transport address mask value and a
maximum message size value. The transport address mask allows
entries in the snmpTargetAddrTable to define a set of addresses
instead of just a single address.
The maximum message size value allows the maximum message size
of another SNMP entity to be configured for use in SNMPv1 (and
SNMPv2c) transactions, where the message format does not specify a
maximum message size.
Sequence
::= { snmpCommunityMIBObjects 2 }
snmpTargetAddrExtEntry
Syntax SnmpTargetAddrExtEntry
Max Access not-accessible