FW 08.01.00 McDATA E/OS SNMP Support Manual (620-000131-630, November 2005)

SNMPv3 MIB

G-23

SNMPv3 MIB

Sequence ::= { snmpModules 16 }

Administrative assignments

Local Contexts

vacmContextTable

Syntax SEQUENCE OF VacmContextEntry

Max Access not-accessible

Status current

Description The table of locally available contexts.

This table provides information to SNMP Command Generator

applications so that they can properly configure the

vacmAccessTable to control access to all contexts at the SNMP entity.

This table may change dynamically if the SNMP entity allows that

contexts are added/deleted dynamically (for instance when its

configuration changes). Such changes would happen only if the

management instrumentation at that SNMP entity recognizes more

(or fewer) contexts.

The presence of entries in this table and of entries in the

vacmAccessTable are independent. That is, a context identified by an

entry in this table is not necessarily referenced by any entries in the

vacmAccessTable; and the context(s) referenced by an entry in the

vacmAccessTable does not necessarily currently exist and thus need

not be identified by an entry in this table.

This table must be made accessible via the default context so that

Command Responder applications have a standard way of retrieving

the information.

This table is read-only. It cannot be configured via SNMP.

REVISION 9711200000Z

Description Initial version, published as RFC2275

vacmMIBObjects OBJECT IDENTIFIER ::= { snmpVacmMIB 1 }

vacmMIBConformanc

OBJECT IDENTIFIER ::= { snmpVacmMIB 2 }