FW 08.01.00 McDATA E/OS SNMP Support Manual (620-000131-630, November 2005)

B
Event Group
B-59
FC Management MIB
Description Count of Broadcast Frames or Packets transmitted out this port. On a
Fibre Channel loop, count only OPNr frames generated.
Sequence
::= { connUnitPortStatEntry 32 }
connUnitPortStatCountRxLinkResets
Syntax OCTET STRING (SIZE (8))
Access read-only
Status mandatory
Description Count of Link resets. This is the number of LRs received. Note, this is
a Fibre Channel only stat.
Sequence
::= { connUnitPortStatEntry 33 }
connUnitPortStatCountTxLinkResets
Syntax OCTET STRING (SIZE (8))
Access read-only
Status mandatory
Description Count of Link resets. This is the number LRs transmitted. Note, this is
a Fibre Channel only stat.
Sequence
::= { connUnitPortStatEntry 34 }
connUnitPortStatCountNumberLinkResets
Syntax OCTET STRING (SIZE (8))
Access read-only
Status mandatory
Description Count of Link resets and LIPs detected at this port. The number times
the reset link protocol is initiated. These are the count of the logical
resets, a count of the number of primatives. Note, this is a Fibre
Channel only stat.
Sequence
::= { connUnitPortStatEntry 35 }
connUnitPortStatCountRxOfflineSequences
Syntax OCTET STRING (SIZE (8))