FW 08.01.00 McDATA E/OS SNMP Support Manual (620-000131-630, November 2005)

B
B-54
E/OS SNMP Support Manual
FC Management MIB
Description Count of Class 1 Frames received at this port. Note, this is a Fibre
Channel only stat.
Sequence
::= { connUnitPortStatEntry 14 }
connUnitPortStatCountClass1TxFrames
Syntax OCTET STRING (SIZE (8))
Access read-only
Status mandatory
Description Count of Class 1 Frames transmitted out this port. Note, this is a Fibre
Channel only stat.
Sequence
::= { connUnitPortStatEntry 15 }
connUnitPortStatCountClass1FBSYFrames
Syntax OCTET STRING (SIZE (8))
Access read-only
Status mandatory
Description Count of times that FBSY was returned to this port as a result of a
Class 1 Frame that could not be delivered to the other end of the link.
This occurs if either the Fabric or the destination port is temporarily
busy. FBSY can only occur on SOFc1 frames (the frames that
establish a connection). Note, this is a Fibre Channel only stat.
Sequence
::= { connUnitPortStatEntry 16 }
connUnitPortStatCountClass1PBSYFrames
Syntax OCTET STRING (SIZE (8))
Access read-only
Status mandatory
Description Count of times that PBSY was returned to this port as a result of a
Class 1 Frame that could not be delivered to the other end of the link.
This occurs if the destination N_Port is temporarily busy. PBSY can
only occur on SOFc1 frames (the frames that establish a connection).
Note, this is a Fibre Channel only stat.
Sequence
::= { connUnitPortStatEntry 17 }