FW 08.01.00 McDATA E/OS SNMP Support Manual (620-000131-630, November 2005)

B
B-52
E/OS SNMP Support Manual
FC Management MIB
connUnitPortStatCountBBCreditZero
Syntax OCTET STRING (SIZE (8))
Access read-only
Status mandatory
Description Count of transitions in/out of BBcredit zero state. The other side is
not providing any credit. Note, this is a Fibre Channel stat only.
Sequence
::= { connUnitPortStatEntry 8 }
connUnitPortStatCountInputBuffersFull
Syntax OCTET STRING (SIZE (8))
Access read-only
Status mandatory
Description Count of occurrences when all input buffers of a port were full and
outbound buffer-to-buffer credit transitioned to zero. There is no
credit to provide to other side. Note, this is a Fibre Channel stat only.
Sequence
::= { connUnitPortStatEntry 9 }
connUnitPortStatCountFBSYFrames
Syntax OCTET STRING (SIZE (8))
Access read-only
Status mandatory
Description Count of times that FBSY was returned to this port as a result of a
frame that could not be delivered to the other end of the link. This
occurs if either the Fabric or the destination port is temporarily busy.
Port can only occur on SOFc1 frames (the frames that establish a
connection). Note, this is a Fibre Channel only stat. This is the sum of
all classes. If you cannot keep the by class counters, then keep the
sum counters.
Sequence
::= { connUnitPortStatEntry 10 }
connUnitPortStatCountPBSYFrames
Syntax OCTET STRING (SIZE (8))