FW 08.01.00 McDATA E/OS SNMP Support Manual (620-000131-630, November 2005)

B
B-50
E/OS SNMP Support Manual
FC Management MIB
connUnitPortStatUnitId
Syntax FcGlobalId
Access read-only
Status mandatory
Description The connUnitId of the connectivity unit that contains this port stat
table.
Sequence
::= { connUnitPortStatEntry 1 }
connUnitPortStatIndex
Syntax INTEGER (0..2147483647)
Access read-only
Status mandatory
Description A unique value among all entries in this table, between 0 and
connUnitNumPort[connUnitPortUnitId].
Sequence
::= { connUnitPortStatEntry 2 }
connUnitPortStatCountError
Syntax OCTET STRING (SIZE (8))
Access read-only
Status mandatory
Description A count of the errors that have occurred on this port.
Sequence
::= { connUnitPortStatEntry 3 }
connUnitPortStatCountTxObjects
Syntax OCTET STRING (SIZE (8))
Access read-only
Status mandatory
Description The number of frames/packets/IOs/etc. that have been transmitted
by this port. Note: A Fibre Channel frame starts with SOF and ends
with EOF. FC loop devices should not count frames passed through.
This value represents the sum total for all other Tx objects.