FW 08.01.00 McDATA E/OS SNMP Support Manual (620-000131-630, November 2005)

B
B-42
E/OS SNMP Support Manual
FC Management MIB
Description This index is used to create a unique value for each entry in the link
table with the same connUnitLinkUnitId. The value can only be
reused if it is not currently in use and the value is the next candidate
to be used. This value wraps at the highest value represented by the
size of INTEGER. This value is reset to zero when the system is reset
and the first value to be used is one.
Sequence
::= { connUnitLinkEntry 2 }
connUnitLinkNodeIdX
Syntax OCTET STRING (SIZE(16))
Access read-only
Status mandatory
Description The node WWN of the unit at one end of the link. If the node WWN
is unknown and the node is a connUnit in the responding agent then
the value of this object MUST BE equal to its connUnitID.
Sequence
::= { connUnitLinkEntry 3 }
connUnitLinkPortNumberX
Syntax INTEGER
Access read-only
Status mandatory
Description The port number on the unit specified by connUnitLinkNodeIdX if
known, otherwise -1. If the value is nonnegative then it will be equal
to connUnitPortPhysicalNumber.
Sequence
::= { connUnitLinkEntry 4 }
connUnitLinkPortWwnX
Syntax FcGlobalId
Access read-only
Status mandatory
Description The port WWN of the unit specified by connUnitLinkNodeIdX if
known, otherwise 16 octets of binary 0.
Sequence
::= { connUnitLinkEntry 5 }