FW 08.01.00 McDATA E/OS SNMP Support Manual (620-000131-630, November 2005)

B
Event Group
B-39
FC Management MIB
status(3),
configuration(4),
topology(5) }
Access read-only
Status mandatory
Description The type of this event.
Sequence
::= { connUnitEventEntry 7 }
connUnitEventObject
Syntax OBJECT IDENTIFIER
Access read-only
Status mandatory
Description This is used with the connUnitEventType to identify which object the
event refers to. Examples are
connUnitPortStatus.connUnitId.connUnitPortIndex,
connUnitStatus.connUnitId, etc.
Sequence
::= { connUnitEventEntry 8 }
connUnitEventDescr
Syntax DisplayString
Access read-only
Status mandatory
Description The description of the event.
Sequence
::= { connUnitEventEntry 9 }
Link Table
This is intended to organize and communicate any information the
agent possesses which would assist a management application to
discover the CONNECTIVITY UNITS in the framework and the
TOPOLOGY of their interconnect. That is, the goal is to assist the
management application not only to LIST the elements of the
framework, but to MAP them.