FW 08.01.00 McDATA E/OS SNMP Support Manual (620-000131-630, November 2005)

B
Port Table
B-29
FC Management MIB
Description The World Wide Name of the port if applicable, otherwise all zeros.
Sequence
::= { connUnitPortEntry 10 }
connUnitPortFCId
Syntax FcAddressId
Access read-only
Status mandatory
Description This is the assigned Fibre Channel ID of this port. This value is
expected to be a Big Endian value of 24 bits. If this is loop, then it is
the ALPA that is connected.
If this is an eport, then it will only contain the domain ID left justified,
zero filled. If this port does not have a Fibre Channel address, return
all bits set to 1.
Sequence
::= { connUnitPortEntry 11 }
connUnitPortSn
Syntax DisplayString (SIZE(0..79))
Access read-only
Status mandatory
Description The serial number of the unit (e.g., for a GBIC). If this is not
applicable, return empty string.
Sequence
::= { connUnitPortEntry 12 }
connUnitPortRevision
Syntax DisplayString (SIZE(0..79))
Access read-only
Status mandatory
Description The port revision (e.g., for a GBIC).
Sequence
::= { connUnitPortEntry 13 }