FW 08.01.00 McDATA E/OS SNMP Support Manual (620-000131-630, November 2005)

B
Port Table
B-27
FC Management MIB
Description The user selected state of the port hardware.
Sequence
::= { connUnitPortEntry 6 }
connUnitPortStatus
Syntax INTEGER {
Access read-only
Status mandatory
Description An overall protocol status for the port. This value of
connUnitPortState is not online, then this is reported Unknown.
Sequence
::= { connUnitPortEntry 7 }
connUnitPortTransmitterType
Syntax INTEGER {
unknown(1),
other(2),
unused(3),
shortwave(4),
longwave(5),
copper(6),
scsi(7),
unknown (1),
unused (2), device cannot report this status
ready (3), FCAL Loop or FCPH Link reset protocol
initialization has completed
warning (4), do not use (4/12/00)
failure (5), do not use (4/12/00)
notparticipating (6), loop notparticipating and does not have a loop
address
initializing (7), protocol is proceeding
bypass (8), do not use (4/12/00)
ols (9) FCP offline status }