FW 08.01.00 McDATA E/OS SNMP Support Manual (620-000131-630, November 2005)

B
Connectivity unit group
B-21
FC Management MIB
Access read-only
Status mandatory
Description The status indicated by the sensor.
Sequence
::= { connUnitSensorEntry 4 }
connUnitSensorInfo
Syntax DisplayString
Access read-only
Status mandatory
Description Miscellaneous static info about the sensor such as its serial number.
Sequence
::= { connUnitSensorEntry 5 }
connUnitSensorMessage
Syntax DisplayString
Access read-only
Status mandatory
Description This describes the status of the sensor as a message. It may also
provide more resolution on the sensor indication, for example 'Cover
temperature 1503K, above nominal operating range'
Sequence
::= { connUnitSensorEntry 6 }
connUnitSensorType
Syntax INTEGER {
unknown(1),
other(2),
battery(3),
fan(4),
ok(3), the sensor indicates ok
warning(4), the sensor indicates a warning
failed(5) the sensor indicates failure }