FW 08.01.00 McDATA E/OS SNMP Support Manual (620-000131-630, November 2005)

B
Connectivity unit group
B-11
FC Management MIB
connUnitUpTime
Syntax TimeTicks
Access read-only
Status mandatory
Description The number of centiseconds since the last unit initialization.
Sequence ::= { connUnitEntry 9 }
connUnitUrl
Syntax DisplayString
Access read-write
Status mandatory
Description URL to launch a management application, if applicable. Otherwise
empty string. In a standalone unit, this would be the same as the
top-level URL. This has the same definition as systemURL for
keywords. If write is not supported, then return invalid. This value
will be retained across boots.
Sequence
::= { connUnitEntry 10 }
connUnitDomainId
Syntax OCTET STRING (SIZE(3))
Access read-only
Status mandatory
Description 24 bit Fibre Channel address ID of this connectivity unit, right
justified with leading zero's if required. This should be set to the
Fibre Channel address ID or if it is a switch it would be set to the
Domain Controller address. If this value is not applicable, return all
bits set to one.
Sequence
::= { connUnitEntry 11 }
connUnitProxyMaster
Syntax INTEGER { unknown(1), no(2), yes(3) }
Access read-only