FW 08.01.00 McDATA E/OS SNMP Support Manual (620-000131-630, November 2005)

B
Connectivity unit group
B-9
FC Management MIB
If your hub has a built-in Ethernet port, it might be reasonable for the
hub to use its MAC address (prefixed with the appropriate NAA) as
its connUnitId. But if the Ethernet were a replaceable PCCard, the
hub should have an independent ID.
Sequence
::= { connUnitEntry 2 }
connUnitType
Syntax FcUnitType
Access read-only
Status mandatory
Description The type of this connectivity unit.
Sequence
::= { connUnitEntry 3 }
connUnitNumports
Syntax INTEGER
Access read-only
Status mandatory
Description Number of physical ports in the connectivity unit (internal/
embedded, external).
Sequence
::= { connUnitEntry 4 }
connUnitState
Syntax INTEGER {
Access read-only
Status mandatory
Description Overall state of the connectivity unit.
Sequence
::= { connUnitEntry 5 }
unknown(1),
online(2), available for meaningful work
offline(3) unavailable for meaningful work, for example in
self-test mode, configuration, etc. }