FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
CLI Commands
2-55
config
NOTE: This command takes effect immediately. The CLI verifies the list
before activating it to the fabric.
Parameters This command has no parameters.
Command Example
Root> config security fabricBinding activatePending
config.security.fabricbinding.addAttachedMembers
Syntax addAttachedMembers
Purpose This command adds all the current members of the fabric to the
Pending FBML. If the domain ID or WWN of a fabric member
already exists in the list, it is not added.
Parameters This command has no parameters.
Command Example
Root> config security fabricbinding addAttachedMembers
config.security.fabricBinding.addMember
Syntax addMember wwn domainId
Purpose This command adds a new member to the Pending FBML in the
fabric binding work area, called the Pending FBML. The number of
entries is limited to the maximum available domain IDs for the fabric,
which is 239.
NOTE: Changes from this command are not activated to the fabric until the
activatePending command is issued.
Parameters This command has two parameters:
wwn Specifies the world wide name (WWN) of the
member to be added to the Pending FBML. The
value of the WWN must be in colon-delimited
hexadecimal notation (for example,
AA:00:AA:00:AA:00:AA:00).
domainId The domain ID of the member to be added to
the Pending FBML. Valid domain IDs range
from 1 to 239.