FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
2-52
E/OS Command Line Interface User Manual
config
Purpose This command sets the role value associated to an existing user name.
The role value can either be set to an administrator or an operator.
This value defaults to “none” when the user is first added to the
database. This value must be changed for all new CLI and web users
before they will be allowed access to their respective interfaces.
Parameters This command has two required parameters:
Command Example
Root> config security authentication user role
01:2A:3f:4:5:0:0 administrator
config.security.authentication.user.show
Syntax show interface
Purpose This command displays a single interface from the local
authentication database.
Parameters This command has one optional parameter:
Command Example
Root> config security authentication user show web
Output Example The output for the config.security.authentication.user.show command
appears as follows:
Interface: Web
Username Interfaces Role
username A valid web or CLI username in the local
authentication database.
privilegeLevel This parameter assigns the privilege level to a
username. Currently only Web and CLI users
can be assigned a role value. This parameter
must be either administrator or operator.
interface The interface that will be displayed. Accepted
values for this parameter are:
cli
web
api
eport
nport.