FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
2-46
E/OS Command Line Interface User Manual
config
There are three slots available for RADIUS servers. Servers will be
added into the list by the index value. The range is 1 to 3. If a server is
added and there is an empty slot before that server, it will be shifted
up to the empty slot. The IP:port is the IP address and the UDP port
on the RADIUS server.
NOTE: If you want to configure a RADIUS server without a key, you must
specify the key as "". The set of double quotes is an empty string in the CLI.
Parameters This command has one required parameter, and two optional
parameters:
Command Example
Root> config security authentication RADIUS server 3
14.2.114.183:6
config.security.authentication.RADIUS.show
Syntax show
Purpose This command displays the current RADIUS server configuration.
Parameters This command has no parameters.
Command Example
Root> config security authentication RADIUS show
Output This command displays all three configured RADIUS servers.
index Index of the RADIUS server (1-3) to add or
modify.
IP IP address of the server.
port The UDP port number.
Deadtime The amount of time a server is marked as
“dead”.
Server The IP address and UDP port of the
configured RADIUS server.
Attempts The number of transmit attempts.
Timeout The timeout value for a server in seconds.