FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
2-44
E/OS Command Line Interface User Manual
config
Output This command displays all valid user names in the local database for
the specified interface.
Output Example The output for the config.security.authentication.port.show command
appears as follows:
Port Override State
---- --------------
0 Default
1 Default
2 Enable
3 Default
4 Disable
config.security.authentication.RADIUS.attempts
syntax attempts index attempts
Purpose This command configures the number of attempts a packet will be
sent to a RADIUS server if a response is not received before the
timeout. After the transmit attempt limit is reached, the switch will, if
applicable, move on to the next defined RADIUS server. The default
is three attempts.
Parameters This command has two required parameters:
Command Example
Root> config security authentication RADIUS attempts 3 20
config.security.authentication.RADIUS.deadtime
Syntax deadtime minutes
Port The port number.
Override State The outgoing authentication override state.
index Index of the RADIUS sever (1-3) to change
the transmit attempts value.
attempts The number of transmit attempts. Valid
values are between 1 and 100.