FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
CLI Commands
2-41
config
config.security.authentication.interface.serial.enhancedAuth
Syntax enhancedAuth enhancedAuthState
Purpose This command sets the enhanced serial authentication state.
Enhanced Serial Authentication will require a user to enter a
password when gaining access to the serial port interface.
Parameters This command has one parameter:
Command Example
Root> config security authentication serial enhancedAuth
enable
config.security.authentication.interface.show
Syntax show interface
Purpose This command displays the settings in the local authentication
database for a single interface.
NOTE: The SANtegrity Authentication feature key must be installed to view
the eport and nport information, and the OSMS information.
Parameters This command has one parameter:
enhancedAuthState This parameter enables and disables
enhanced authentication on the serial port
interface. Accepted values for this
parameter are enable or disable. Boolean 1
and 0 values may also be substituted.
interface The interface that will be displayed. Valid
values for this parameter are:
cli
web
osms
api
serial
eport
nport