FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
2-36
E/OS Command Line Interface User Manual
config
Parameters This command has one required parameter, and one optional
parameter:
NOTE: A preferred method of local and a backup method of RADIUS is not
an accepted combination because the local method can always be contacted.
Command Example Root> config security authentication interface api
sequence RADIUS local
config.security.authentication.interface.cli.sequence
Syntax sequence method1 [method2]
Purpose This command sets the sequence that the CLI interface will use to
authenticate. When the preferred method cannot be contacted, the
backup method will be used to authenticate the CLI login.
Parameters This command has one required parameter, and one optional
parameter:
NOTE: A preferred method of local and a backup method of RADIUS is not
an accepted combination because the local method can always be contacted.
method1 This sets the preferred method of
authentication. Accepted values are local or
RADIUS.
method2 This optional parameter sets the backup
method of authentication. This backup
method is used when the preferred method
cannot be contacted. Accepted value is local.
method1 This sets the preferred method of
authentication for the CLI interface. Accepted
values are local or RADIUS.
method2 This optional parameter sets the backup
method of authentication for the CLI
interface. This backup method is used when
the preferred method cannot be contacted.
Accepted value is local.