FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
CLI Commands
2-29
config
Parameters This command has one parameter:
Command Example
Root> config port show 4
Output This command output appears as a table that includes the following
properties:
Output Example The output from the config.port.show command appears as follows:
portNumber Specifies the port number. Valid values are:
0–11 for the Sphereon 4300
0–15 for the Sphereon 3016
0-15 for the Sphereon 4400
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032
0–31 for the Sphereon 3232
0-31 for the Sphereon 4700
0–63 for the Intrepid 6064
0–127 and 132–143 for the Intrepid 6140
Port Number The port number.
Name The configured port name.
Blocked The blocked state. Valid values are true and false.
FAN The fabric address notification (FAN) state. Valid
values are true and false. (Sphereon 4300 and
Sphereon 4500 switches only.)
Type The port type. Valid values are:
•F Port
•E Port
•G Port
• Fx Port (Sphereon 4300 and Sphereon 4500 only)
• Gx Port (Sphereon 4300 and Sphereon 4500
only)
Speed The port speed. Valid values are 1 Gb/sec, 2 Gb/sec,
and Negotiate.
Rx BB_Credits The number of configured Rx BB_Credits.