FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
2-28
E/OS Command Line Interface User Manual
config
config.port.rxCredits
Syntax rxCredits PortNumber RxCredits
Purpose This command is used to set the number of initial BB_Credits for a
given port. The number of credits assigned must fall between the
minimum and maximum allowed values for the port.
Parameters This command has two required parameters:
Command Example
Root> config port rxCredits 8 40
config.port.show
Syntax show portNumber
Purpose This command displays the current configuration for the specified
port.
portNumber Specifies the port number. Valid values are:
0–11 for the Sphereon 4300
0–15 for the Sphereon 3016
0-15 for the Sphereon 4400
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032
0–31 for the Sphereon 3232
0-31 for the Sphereon 4700
0–63 for the Intrepid 6064
0–127 and 132–143 for the Intrepid 6140
numBBCredits Specifies the number of Rx BB_Credits to
assign the specified port.
For the Sphereon 4300 and Sphereon 4500 the
RxCredits per port must be between 2 and 12.
The total number of Rx Credits assigned
across all ports must not exceed the
maximum pool size of 150.
For the Intrepid family, the RxCredits per
FPM/UPM port must be between 1 and 60.
The RxCredits per XPM port must be
between 4 and 400. There is no pool
limitation.