FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
CLI Commands
2-27
config
Parameters This command has two required parameters:
Command Example
Root> config port fan 4 1
config.port.name
Syntax name portNumber portName
Purpose This command sets the name for a port.
Parameters This command has two required parameters:
Command Example
Root> config port name 4 Sam’s tape drive
portNumber Specifies the port number. Valid values are:
0–11 for the Sphereon 4300
0-15 for the Sphereon 4400
0–23 for the Sphereon 4500
0–31 for the Sphereon 3232
0-31 for the Sphereon 4700
fanState Specifies the FAN state for the port. Valid
values are true and false. Boolean 1 and 0 may be
substituted as values.
portNumber Specifies the port number. Valid values are:
0–11 for the Sphereon 4300
0–15 for the Sphereon 3016
0-15 for the Sphereon 4400
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032
0–31 for the Sphereon 3232
0-31 for the Sphereon 4700
0–63 for the Intrepid 6064
0–127 and 132–143 for the Intrepid 6140
portName Specifies the name for the port. The port name
must not exceed 24 characters in length.