FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

CLI Commands

2-17

config

Period: 300 seconds

State: Disabled

config.fencing.showTypeTable

Syntax showTypeTable

Purpose This command displays the table of different fencing types that can

be assigned to a policy. This table is used for reference only.

Parameters This command has no parameters.

Command Example

Root> config fencing showTypeTable

Output Example The output from the config.fencing.showTypeTable command appears

as follows:

Number Fencing Policy Types

---------------------------------

1 Protocol Error

2 Link Level Hot I/O

3 Security Violationss

config.ficonCUPZoning.addControlHost

Syntax addControlHost hostNodeWwn

Purpose This command adds a control host to the Control Host List used to

determine the FICON host(s) capable of viewing all ports. This list

overrides the FCZ port visibility mask. The maximum entries in this

list is 8.

Parameters This command has one parameter:

Command Example

Root> config ficonCUPZoning addControlHost 01:02:03:04:

05:06:07:08

hostNodeWwn The node World Wide Name (WWN) of the

desired control host, entered in

colon-delimited notation (e.g.,

01:02:03:04:05:06:07:08).