FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
CLI Commands
2-9
config
Parameters This command has one parameter:
Command Example
Root> config features openSysMS 1
NOTE: The command config.openSysMS.setState on page 2-25 has
functionality that is identical to this command.
config.features.openTrunking
Syntax openTrunking openTrunkingState
Purpose This command enables or disables OpenTrunking feature. The
OpenTrunking feature key must be installed in order to enable open
trunking.
Parameters This command has one parameter:
Command Example
Root> config features openTrunking 1
NOTE: The command perf.openTrunking.setState on page 2-136 has
functionality that is identical to this command.
config.features.show
Syntax show
Purpose This command shows the product feature information configured for
this director or switch.
Parameters This command has no parameters.
osmsState Specifies whether the Open Systems
Management Server is enabled. Valid values are
enable and disable. Boolean 1 and 0 may be
substituted as values.
openTrunkingState This parameter can be set to enable or disable
the OpenTrunking feature. Boolean 1 and 0
may be substituted as values.