FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
2-8
E/OS Command Line Interface User Manual
config
Parameters This command has one parameter:
Command Example
Root> config features installKey AaBb-CCdD-eeFF-gH
config.features.NPIV
Syntax setState NPIVState
Purpose This command enables or disables NPIV feature. The NPIV feature
key must be installed in order to enable this feature.
Parameters This command has one parameter.
Command Example
Root> config features NPIV enable
NOTE: The command config.NPIV.setState on page 2-24 has functionality that
is identical to this command.
config.features.openSysMS
Syntax openSysMS openSysMSState
Purpose This command enables or disables Open Systems Management
Server (OSMS). OSMS is a feature that allows host control and inband
management of the switch or director through a management
application that resides on an open-systems interconnection (OSI)
device.
featureKey Specifies the key you have received to enable
optional software feature on a specific product.
A feature key is a string of case-sensitive,
alphanumeric ASCII characters.
The number of characters may vary in the
format; however, the key must be entered
exactly, including the hyphens. An example of a
feature key format is XxXx-XXxX-xxXX-xX.
NPIVState Valid values are enable and disable. Boolean 1
and 0 may be substituted as values.