FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
CLI Commands
2-7
config
config.features.ficonMS
Syntax ficonMS ficonMSState
Purpose This command enables or disables FICON Management Server. The
FICON Management Server feature key must be installed in order to
enable the FICON Management Server State. (The Sphereon 4300 and
Sphereon 4500 switches do not accept this command.)
NOTE: This command is displayed on a Sphereon 3016 and 3216 only if
the feature key is installed.
NOTE: If the FICON Management Server is enabled, the default
management style is the FICON Management Style. The Open Systems
Management Style cannot be used.
Parameters This command has one parameter:
Command Example
Root> config features ficonMS 1
NOTE: The command config.ficonMS.setState on page 2-20 has functionality
that is identical to this command.
config.features.installKey
Syntax installKey featureKey
Purpose This command installs a feature set that with the provided feature
key. The switch can be either offline or online when this command is
executed.
NOTE: If any currently installed features are being removed by the new
feature key, the switch must be offline when the command is given.
ficonMSState Specifies whether the FICON Management
Server is enabled. Valid values are enable and
disable. Boolean 1 and 0 may be substituted as
values.