FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
2-6
E/OS Command Line Interface User Manual
config
Parameters This command has one parameter:
Command Example
Root> config enterpriseFabMode setState 1
NOTE: You cannot activate Enterprise Fabric Mode while Open Trunking is
enabled.
config.features.enterpriseFabMode
Syntax enterpriseFabMode enterpriseFabModeState
Purpose This command sets the Enterprise Fabric Mode state for the fabric.
The SANtegrity™ feature key must be installed to activate the
Enterprise Fabric Mode state.
Parameters This command has one parameter:
Command Example
Root> config features enterpriseFabMode 1
NOTE: The command config.enterpriseFabMode.setState on page 2-5 has
functionality that is identical to this command.
enterpriseFabModeState Specifies whether enterpriseFabMode is
active. Valid values are activate and
deactivate. Boolean 1 and 0 may be
substituted as values.
enterpriseFabModeState Specifies whether enterpriseFabMode is
active. Valid values are activate and
deactivate. Boolean 1 and 0 may be
substituted as values.