FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2-4

E/OS Command Line Interface User Manual

New and Changed Commands

• config.syslog.setLogConfig on page 2-108

• config.syslog.setState on page 2-108

• config.syslog.show on page 2-109

• config.system on page 2-110

• config.system.contact on page 2-110

• maint.port.beacon on page 2-124

• maint.port.reset on page 2-125

• perf.class2 on page 2-128

• perf.class3 on page 2-129

• perf.clearStats on page 2-131

• perf.errors on page 2-131

• perf.link on page 2-133

• perf.openTrunking.congestionThresh on page 2-135

• perf.openTrunking.show on page 2-137

• perf.preferredPath.clearPath on page 2-140

• perf.preferredPath.setPath on page 2-141

• perf.thresholdAlerts.counter.addPort on page 2-150

• perf.thresholdAlerts.counter.removePort on page 2-151

• perf.thresholdAlerts.throughput.addPort on page 2-159

• perf.thresholdAlerts.throughput.removePort on page 2-160

• perf.traffic on page 2-165

• show.epFrameLog.disableTrigger on page 2-170

• show.epFrameLog.setTrigger on page 2-173

• show.fabric.traceRoute on page 2-181

• show.port.exit on page 2-198

• show.port.info on page 2-200

• show.port.nodes on page 2-201

• show.port.opticData on page 2-203

• show.port.opticHealth on page 2-205