FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
CLI Commands
2-3
New and Changed Commands
• config.security.ssl.show on page 2-73
• config.snmp.addAccessEntry on page 2-76
• config.snmp.deleteAccessEntry on page 2-85
• config.snmp.addTargetParams on page 2-78
• config.snmp.addUserEntry on page 2-80
• config.snmp.addV1Target on page 2-82
• config.snmp.addV2Target on page 2-83
• config.snmp.addV3Target on page 2-83
• config.snmp.deleteAccessEntry on page 2-85
• config.snmp.setSNMPv3State on page 2-86
• config.snmp.addUserEntry on page 2-80
• config.snmp.deleteV3Group on page 2-86
• config.snmp.setSNMPv3State on page 2-86
• config.snmp.showAccessTable on page 2-89
• config.snmp.showTargetTable on page 2-90
• config.snmp.showUserTable on page 2-91
• config.snmp.showV3GroupTable on page 2-92
• config.snmp.showViewTable on page 2-93
• config.snmp.validateUser on page 2-94
• config.switch.apiState on page 2-95
• config.switch.haMode on page 2-97
• config.syslog on page 2-107
• config.syslog on page 2-107
• config.switch.show on page 2-104
• config.switch.webState on page 2-106
• config.switch.apiState on page 2-95
• config.syslog on page 2-107
• config.syslog.addServer on page 2-107
• config.syslog.deleteServer on page 2-107