FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
2-236
E/OS Command Line Interface User Manual
show
Output Example The output from the show.thresholdAlerts.alerts command appears as
follows:
Name Type State
------------------------------------ ----------------- --------
Throughput Threshold #1 Rx Util Enable
Threshold for CRC CRC Errors Disabled
CRC Errors CTA - CRC Errors.
Discarded Frames CTA - Discarded Frames.
Frames Too Short CTA - Frames Too Short.
Delimiter Errors CTA - Delimiter Errors.
Address ID Errors CTA - Address ID Errors.
Cls2 BusiedFrms CTA - Class 2 Busied
Frames.
Cls2 RejectedFrms CTA - Class 2 Rejected
Frames.
Cls3 DiscardFrms CTA - Class 3 Discarded
Frames.
Phys Lnk Err Set CTA - Physical Link Errors
Summed Set.
Lnk Seq Cnt Set CTA - Link Sequence
Counts Summed Set.
Logic Lnk Err Set CTA - Logical Link Errors
Summed Set.
LIPS Detected CTA - Loop Initialization
Primitives detected
(Sphereon 4300 and 4500
only).
LIPS Generated CTA - Loop Initialization
Primitives Generated
(Sphereon 4300 and 4500
only).
State The enabled state of the CTA, either enabled or
disabled.