FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
CLI Commands
2-233
show
Output The system attributes are displayed as a table that includes the
following properties.
Output Example The output from the show.system command appears as follows:
System Information
Name: Joe's Switch
Description: McDATA ED-6064 Fibre Channel Director
Contact: Joe
Location: Everywhere
Date/Time: 04/16/2001 10:34:01AM
Name The system name. For more information, see
config.system.name on page 2-112.
Contact The system contact as set in the
config.system.contact command. For more
information, see config.syslog on page 2-107.
Description The system description. For more information,
see config.system.description on page 2-111.
Location The system description. For more information,
see config.system.location on page 2-111.
Serial Number The serial number for the system.
Type Number The type number for the system.
Model Name The model name for the system (for example,
Sphereon 4500).
Model Number The model number for the system. All products
have the model number 001, except 1 Gb sheet
metal units, which are 002.
EC Level The engineering change level installed.
Firmware
Version
The current firmware version installed.
Beaconing The enabled state of unit beaconing (enabled or
disabled) as set in the maint.system.beacon
command.
Date/Time The system date and time as set in the
config.system.date command. For more
information, see config.system.date on
page 2-110.