FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
2-232
E/OS Command Line Interface User Manual
show
Output Example The output from the show.switch command appears as follows:
Show> switch
State: Online
BB_Credit: 2
R_A_TOV: 20
E_D_TOV: 4
Preferred Domain Id: 1
Switch Priority: Default
Speed: 2 Gb/sec
Rerouting Delay: Enabled
Interop Mode: Open Fabric 1.0
Active Domain Id: 1
World Wide Name: 10:00:08:00:88:00:21:07
Insistent Domain Id: Enabled
Domain RSCN: Enabled
Zoning RSCN: Disabled
FC Address Domain Id: 67 (hexadecimal)
Limited Fabric RSCN: Disabled
Fabric Filtering: Enabled
Safe Zoning: Enabled
ISL Equal Cost: Enabled
Web Enabled: Enabled
API Enabled: Enabled
HA Mode: Disabled
API Management IP: 100.0.0.1
show.system
Syntax system
Purpose This command displays a set of system attributes.
Parameters This command has no parameters.
Command Example
Root> show system
API Enable The enabled state of API.
API Management
IP
IP address for of where the application that is
managing the switch or director resides. If there
is no application managing the switch, this will
be the IP address of the switch.
HA Mode The enabled state of HA mode.