FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
CLI Commands
2-231
show
Interop Mode The interoperability mode as set in the
config.switch.interopMode command. For more
information, see config.switch.interopMode on
page 2-98.
Active Domain
Id
The active domain ID of the switch or director.
This ID may or may not be the same as the
preferred domain ID.
World Wide
Name
The WWN for the switch or director.
Insistent Domain
Id
Configured insistent domain ID state as set in
the config.switch.insistDomainId command. For
more information, see
config.switch.insistDomainId on page 2-97.
Domain RSCN Configured domain RSCN state as set in the
config.switch.domainRSCN command. For more
information, see config.switch.domainRSCN on
page 2-96.
Zoning RSCN Configured Zoning RSCN state as set in the
config.switch.zoningRSCN command. For more
information, see config.switch.webState on
page 2-106.
FC Address
Domain Id
The domain ID of the switch derived from the
Fibre Channel Address.
Limited Fabric
RSCN
When enabled, fabric RSCNs are suppressed
after an IPL.
Isolate Zone
RSCN
When set to fabric filtering, fabric RSCNs will
only be sent to those members that need
notification. When set to No Filtering, RSCNs
will be set to everyone when zoning
information changes.
Fabric Filtering The enabled state of fabric filtering.
Safe Zoning Safe zoning state.
ISL Equal Cost The method for computing the FSPF cost for
ISLs.
Web Enable The enabled state of web.