FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
2-230
E/OS Command Line Interface User Manual
show
show.switch
Syntax switch
Purpose This command displays the switch attributes.
Parameters This command has no parameters.
Command Example
Root> show switch
Output The switch attributes data is displayed as a table that includes the
following properties:
State The state of the switch (for example, online or
offline).
BB Credit The BB_Credit. (This does not apply to the
Sphereon 4300 and Sphereon 4500 switches.)
R_A_TOV The resource allocation timeout value
(R_A_TOV) as set in the config.switch.raTOV
command.
E_D_TOV The error detect timeout value (E_D_TOV) as
set in the config.switch.edTOV command.
Preferred
Domain Id
The domain ID as set in the
config.switch.prefDomainId command.
Switch Priority The switch priority as set in the
config.switch.priority command. For more
information, see config.switch.priority on
page 2-100.
Speed The switch speed as set in the
config.switch.speed command. (This command
is only applicable for the Intrepid 6064 and So
this information is only available in intrepid
6064.) For more information, see
config.switch.speed on page 2-103.
Rerouting Delay The rerouting delay as set in the
config.switch.rerouteDelay command. For more
information, see config.switch.rerouteDelay on
page 2-101.