FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
2-228
E/OS Command Line Interface User Manual
show
Output Example The output from the show.snmp.viewTable command appears as
follows:
View Name Type Object ID
-------------------------------- ------------------ ---------
no_access View Excluded .1.3.6.1
internet View Included .1.3.6.1
management View Included .1.3.6.1.2
experimental View Included .1.3.6.1.3
private View Included .1.3.6.1.4
snmpv3 View Included .1.3.6.1.6
fceos View Included .1.3.6.1.4.1.289
fcmgmt_3_1 View Included .1.3.6.1.2.1.8888
fcmgmt_3_0 View Included .1.3.6.1.3.94
fcfe View Included .1.3.6.1.3.42
system View Included .1.3.6.1.2.1.1
ip View Included .1.3.6.1.2.1.4
NOTE: The command config.snmp.showViewTable on page 22-93 has
functionality that is the same as this command.
show.snmp.config
Syntax config
Purpose This command displays the switch SNMP configuration.
Parameters This command has no parameters.
NOTE: The command config.snmp.show on page 2-88 has functionality that is
identical to this command.
Command Example Root> show snmp config