FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
CLI Commands
2-221
show
Parameters This command has no parameters.
Command Example
Root> show security portBinding
Output The port binding configuration data is displayed as a table that
includes the following properties:
Output Example The output from the show.security.portBinding command appears as
follows:
Port WWN Binding Bound WWN
---- ----------- -----------------------
0 Active AA:00:AA:00:AA:00:AA:00
1 Inactive 00:00:00:00:00:00:00:00
2 Inactive CC:33:44:55:CC:33:44:55
3 Active 00:00:00:00:00:00:00:00
4 Inactive 00:00:00:00:00:00:00:00
5 Inactive 00:00:00:00:00:00:00:00
6 Inactive 00:00:00:00:00:00:00:00
7 Inactive 00:00:00:00:00:00:00:00
8 Inactive 00:00:00:00:00:00:00:00
9 Inactive 00:00:00:00:00:00:00:00
10 Inactive 00:00:00:00:00:00:00:00
11 Inactive 00:00:00:00:00:00:00:00
12 Inactive 00:00:00:00:00:00:00:00
13 Inactive 00:00:00:00:00:00:00:00
14 Inactive 00:00:00:00:00:00:00:00
15 Inactive 00:00:00:00:00:00:00:00
show.security.switchAcl
Syntax switchAcl
Purpose This command displays the contents of the Switch Access Control
List.
Parameters This command has no parameters.
Command Example
Root> show security switchACL
Port The port number.
WWN Binding The state of port binding for the specified port
(active or inactive).
Bound WWN The WWN of the device that is bound to the
specified port. If this field is blank, no device is
bound to the specified port.