FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
CLI Commands
2-219
show
Output The fabric binding configuration data is displayed as a table that
includes the following properties:
Output Example The output from the show.security.fabricBinding command appears as
follows:
Domain 1 (20:30:40:50:60:70:8F:1A) (Local)
Domain 3 (00:11:22:33:44:55:66:77) (Unattached)
Domain 2 (88:99:AA:BB:CC:DD:EE:FF) (Attached)
Domain 14 (11:55:35:45:24:78:98:FA) (Attached)
show.security.log
Syntax log [clear]
Purpose This command shows the contents of the security log as maintained
in NV-RAM on the director or switch.
Parameters This command has one parameter:
Command Example
Root> show security log
Domain ID The domain ID of the Fabric Binding
Membership List (FBML) member. Valid
domain IDs range from 1 to 239.
WWN The world wide name (WWN) of the FBML
member in colon-delimited hexadecimal
notation.
Attachment
Status
Indicates whether the FBML member is Local,
Attached, or Unattached. For more information,
see Fabric Binding Membership Terminology on
page 2-53.
clear This optional parameter causes all security log
entries to be cleared.