FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
2-218
E/OS Command Line Interface User Manual
show
sourcePort set to all
Root> show preferredPath showPath 1 all
Preferred Path State: Enabled
Source Port Preferred Exit Port Actual Exit Port
------------------ ------------------- ----------------
0 2 No Source
2 5 5
3 17 No Path
22 5 6
show.preferredPath.showState
Syntax showState
Purpose This command displays the state of the preferred path.
Parameters This command has one parameter:
Command Example
Root> show.preferredPath.showState
show.security.fabricBinding
Syntax fabricBinding
Purpose This command displays the fabric binding configuration saved on the
fabric. The command performs the same function as the command
See config.security.fabricBinding.showActive on page 2-57..
Parameters This command has no parameters.
Command Example
Root> show security fabricBinding
Preferred Path
State
Indicates the state of the preferred path
(Enabled or Disabled).