FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
2-210
E/OS Command Line Interface User Manual
show
Output Example The output from the show.port.profile command appears as follows:
Port Number: 4
Name: Sam's tape drive
Blocked: False
Operating Type: FL Port
Operating Speed: 2 Gb/sec
Port WWN: A2:33:15:C3:3F:00:00:0A
Configured Type: Gx_Port
Configured Speed: Negotiate
Beaconing: Disabled
FAN: Disabled
FC Address: 034FA2
Attached WWN: F0:01:02:A1:B0:22:00:12
Operational State: Online
Reason: None
Rx BB_Credits: 12
Connector Type: LC
Transceiver: Long LC
Distance Capability: Long
Media Type: M-M 50um
Speed Capability: 2 Gb/sec
10G FC Compliance: None
show.port.showPortAddr
Syntax showPortAddr
Purpose This command displays the port address configuration for all ports.
Reason The reason that the port operational state is
not “online”.
Rx BB_Credits Then number of configured Rx BB_Credits.
Connector Type Optic connector type.
Transceiver Optic transceiver type.
Distance Capability Optic distance capability.
Media Type Optic media type.
Speed Capability Optic speed capability.
10G FC Compliance Optic 10G FC Compliance code.